Engine – Engine Idle Speed (IAA Unit) Blanking Grommets

We know how much money a Figaro repair can usually cost but not this time! These little grommets seal the adjustment holes (normally empty) in the IAA unit located in the engine bay. The grommets stop dirt getting into the threads of the adjuster screws also acts as an extra air seal if the O rings inside are leaky.

You can buy a pack of 10 of these and they blank the 3 adjustment holes for just £2.58 (UK)

Select 12mm Buy here

Tip! If you put a tiny bit of lube on the side of IAA hole threads before you put the blanking plugs in, they will slide into the threaded holes better and then sit flat to the face of the IAA unit.

Related posts:

Boot Brackets – Re-chroming Service Engine – Gearbox Conversion to Manual Video Dashboard – Step by step guide on removing and replacing Patrick Light – Suspension Upgrade Cleaning – How polish Windscreen Surround On A Nissan Figaro Video Wiper Arm- How to remove and paint your wiper arms Jörg Nittke – Dashtop Restoration Dashboard – how to repainting the fascia
Image of IMG_5281
Adjustment holes are normally empty
Image of IMG_5278
Grommets fit in the holes and seal the screw
Image of IMG_5289
Pack of 10 means you could do 3 cars!
Image of IMG_5291
Original grommet is on the left and new ones on the right
Published on 2nd June 2020